600W electronic Ballast Lumatek 600W

The LUMATEK ELECTRONIC BALLAST dimmable 600W , with the help of a control knob you can adjust the light emission according to your specific needs. This innovative ignition system has a 4-stage controller that allows you to set the desired output at 100%, 75%, 50% or "Super Lumen". "Super Lumen" will allow you to increase the lumens produced by your lamp by 10%. By setting the ignition system to 50% during the vegetative phase you will notice a very important energy saving; we underline how, with these adjustments, it is also possible to work with 400w and 600w indoor lamps . Last but not least is the advantage of the low heat emission that this type of power supplies emit thus helping to control the temperatures in the grow spaces.

Lumatek electronic ballast Operation

The Lumatek ECG works correctly with hps-mh-agro lamps. When you want to take advantage of the dimming functions, we recommend making sure that the lamp works for at least 10 minutes continuously; all of course before adjusting the setting to a different phase. When using a 400w lamp, it is advisable to switch on at 100%, wait 10 minutes and only then select the desired power.
Finally, remember that making quick changes to the setting could cause the bulb to overheat. To adjust the desired output level just a simple click; all through a simple selection that concerns the control knob one of the 4 available settings.

NB: the Lumatek electronic ballast does not allow the Philips lamps to be switched on, if you have a philips lamp we recommend the purchase of the 600W dimmable Bolt electronic ballast or the 600W Sunmaster Hobby electronic ballast