S150 Vents wall fan

Vents S150 Axial wall Fan with 150 mm diameter flange, operating power 240 m³/h and with low noise of 33dBA. Vents room extractor with continuous or periodic exhaust ventilation, suitable for service spaces such as showers, kitchens, bathrooms and the like.

This jewel with an elegant design, made of high quality ABS plastic, has not only high efficiency and durability, but also a very low noise level of 33 dBA.

The room extractor in question is compatible with 150mm, or 125mm and 100mm air ducts installed with appropriate reductions.

Possibility of mounting directly to the ventilation shaft or via connection to the duct.

Its motor has low energy consumption , using only 7W and is designed for continuous operation, without requiring maintenance.

Uses of the Vents S150 Axial wall Fan

The fume extractor can be turned on by a built-in switch, which will not be usable if mounted on the wall. Furthermore, using a "dimmer" regulator, it is possible to set the desired speed.

In the case of installation on walls, ceilings or cavities, this fan for humid environments can be controlled both by the light switch and by environmental sensors, to which multiple fans can be connected.

Automatic operation of the Vents S150 fan

When using tools to automate operation such as: humidity sensors or timers. The S150 fan will activate independently regardless of the operation of the second one, if one of the parameters requires it.

The fan of this room extractor is mounted on the ventilation shaft, therefore it can be connected directly to the exhaust duct. While the application of a flexible pipe is recommended if it is located far from the outlet flow.

Product Sheet S 150 wall fan by Vents

• Product: S150 wall fan;
• Brand: Vents;
• Flange size: 150mm;
• Material: ABS plastic;
• Air flow: 240 m³/h;
• Noise: 33dBA;
• Use: bathrooms, kitchens, showers, humid environments with low air exchange.

The Vents S150 wall fan is at your disposal, on our online shop and always at the best price.