Milwaukee Ph54 Ph Tester Waterproof

The Milwaukee PH54 PH Tester Waterproof is used in hydroponics for pH measurement of water/nutrient solution.

pH is one of the most important parameters in the growth phase of the plant. This value must be optimal and be around 5.8 - 6.0, to ensure that the seedlings grown in hydroponics grow healthy and luxuriant.

The pH tester, therefore, allows you to check that the pH of the nutrient solution or water is always optimal and in balance, neither too acidic nor too basic.

The Milwaukee PH tester is distinguished from other similar products by its particular junction electrode, made of nylon fiber, which can be easily replaced, allowing the device to be used for many years.

Thanks to this Milwaukee pH tester you will be able to avoid pH measurement errors and guarantee your crops the best possible growth environment.

Technical sheet of the Milwaukee pH tester

• Manufacturer: Milwaukee;
• pH range : 0.00-14;
• Resolution: 0.01pH;
• Accuracy y (@25 °C) : ± 0.1 pH;
• Typical EMC Deviation: ±0.1;
• pH electrode: MA73600;
• Environment: 0 to 50°C;
• Maximum relative humidity: 100%;
• Battery type: 3 x 1.5V;
• Battery Life: Approx. 1500 hours of continuous use;
• Dimensions: 165 x 30 x 30mm;
• Weight: 80g.

pH Tester waterproof Milwaukee ph54: characteristics and advice for use

the Milwaukee PH 54 is a waterproof pH meter perfect for all those who want to successfully dedicate themselves to cultivation with hydroponic systems.

Simple and rugged design, offers great value for any application. Its particular structure allows it to resist water infiltration, but what must never be immersed is the display.

The device is able to measure pH with a scale from 0.0 to 14.0 , and an accuracy level of ±0.2 . With an easy manual 2-point calibration, the tester can be used quickly and easily even by those who are not familiar with these devices.

Here are some suggestions for optimal use and proper maintenance:

1. Always store with the cap filled with MA9015 buffer or storage solution, not water;
2. Regularly clean your tester by soaking it in the MA9016 cleaning solution;
3. Perform calibration after cleaning and/or storage before testing to adjust for changes in the pH sensor.;
4. Gently mix the tester into the sample for a faster result.

During the growth and flowering phases of the plants it is extremely important to keep the nutrients that can alter the pH of the water under control.

If you need a waterproof pH meter, simple to use and effective in measurements, choose the Milwaukee PH54 PH Tester Waterproof by purchasing it directly online on the Grow Shop Italia website.