Mc 110 Milwaukee pH meter

The MC 110 pH meter with smart monitor is the ideal Milwaukee ph tester for constant control of the pH values in water and growing medium.

pH monitor Milwaukee smart MC 110

Milwaukee Smart pH Monitor MC-110 allows you to accurately and continuously monitor the pH values of a solution directly in the tank

This panel measuring tool is perfect for both a hydroponic grow and aquarium .

The MC 110 pH Meter with Probe features include:

1. Manual calibration;
2. Set point scale adjustable from 3.5 to 7.5 pH;
3. Alarm function when the value is higher or lower than the set pH,

The MA911B pH electrode measuring probe is included. The MC110 pH monitor is sold complete with 12 VDC adapter and calibration solution.

pH Monitor MC 110 Technical Data Sheet

• Brand : Milwaukee;
• Model : MC 110;
• Typology : continuous pH meter;
• Measurement scale : from 0 to 14 pH;
• Resolution : 0.1pH;
• Degree of accuracy (25°C) : up to ± 0.2 pH;
• Selection point : 3.5 - 7.5 pH;
• Power supply : 220V - 12V;
• Dimensions : 148.5 x 82.5 x 32mm;
• Weight :710g.

How the MC 110 pH monitor works

Operating guide to the operation of the device Milwaukee pH meter MC 110 :

1. Calibrate the meter before using it by following the included instructions;
2. Connect the tool to the power outlet;
3. Remove the protective cap from the electrode and activate it by immersing it for a few minutes in the maintenance solution (MA9015);
4. Connect the electrode probe to the BNC connector of the instrument;
5. Turn on the device by pressing the ON/OFF button;
6. Dip the tip of the probe (2.5cm) into the sample to be measured;
7. Shake and wait for the measure to stabilize.

The MC 110 pH tester is ready for continuous monitoring. Buy it now directly online at Grow Shop Italia .