Details
HPS AGRO Lamp Light Kit 1000W
The HPS Agro 1000W light kit is certainly the most powerful among the indoor lighting kits , in fact it is able to excellently cover surfaces from 2 to 3m2. The spectrum emitted by the agro lamp includes blue and red shades in the right proportion, finding optimal application both in the growth and flowering of the plant.
The HPS AGRO 1000W Lamp Light Kit is assembled with the following elements:
- ALMECO hammered stucco lamp reflector with E 40 lamp holder:
The Almeco stuco reflective screen, the most purchased and used on the market, combines very high reflection (crx approximately 95%) with a simple and light structure. The lamp reflector is essential for concentrating the light from the grow lamp into the surface below. - ETI 1000W power supply:
The ETI 1000W magnetic ballast allows you to turn on any 1000W agro, hps and mh lamp . It is equipped with ignition LEDs, class H dT max 75° ballast, impregnated with polyester resin, igniter and condenser are incorporated inside (cos-Fi ≥ 0.9). Supplied with assembly instructions. It is suggested not to connect at a distance greater than 15 meters from the lamp. - Agro Sunmaster dual 1000W lamp:
The Sunmaster dual 1000W, rich in mixed red and blue tones, emits a spectrum that optimally supports all phases of indoor cultivation , allowing you to save on the separate purchase of the HPS lamp and the MH lamp. Being the most powerful among the agro lamps for indoor cultivation it is applied on surfaces no smaller than 2m2 and requires a distance from the plants of approximately 60-70cm to avoid thermal damage to the cultivation. - 1.5mm 3 core cable:
The indoor grow light kit is supplied with 3 meters of 1.5 mm fireproof three-pole power cable suitable to withstand the wattage of power supplies up to 1000w - Plug:
Not all plugs are the same. Together with the cable, the 16 A three-pole plug with large teeth ensures excellent current transmission.
Tips for using the HPS 1000W lamp lighting kit
This indoor lighting kit is the most powerful on the market. Therefore it is of fundamental importance to counteract the large amount of heat emitted by the 1000W indorr agro lamp. It is advisable not to install this light kit in environments with a surface area of less than 2m2 and a height of less than 2m.
To further protect your grow from heat it is advisable to use an air-cooled reflector (such as the Airontek Glorious 150mm Cooled Reflector) so you can isolate the hot bulb and eliminate the heat by connecting the air extractor to the reflector.
More Information
Manifacturer | GSI |
---|---|
Distance from plants | 60-70 MC |
Suitable surface | UP TO 2.5 SQM. |
Shipments all over Europe | Yes |
Brand and Model | HPS AGRO LIGHT KIT |
Manuals and related articles | WHAT ARE HPS LAMPS |
Type of lighting | MH |
Features | growth and flowering |