Ice Washer with 5 bags

Ice Washer Pollini and Resins Extractor With Bubblest -style ice technique. mechanical washing machine for ice draws.

modalit & agrave; of use of the lavartice for draws

• 1) Place Ice Washer on a mezzanine top and a bucket on the ground. Place the filter bags in the bucket, respecting l & rsquo; order of the microns. The most filtering bag more; end must be inserted first in the bucket and to follow the others.
• 2) Fill Washer high school for met & agrave; of cold water, introduce the ice. Turn on L & Rsquo; Ice-Washer, to facilitate the dissolution of the ice until it reaches the desired temperature (recommended around 2 & deg; -4 & deg;).
• 3) Fill the pyramidal bag (max 500gr) with the previously frozen material. Introduce the bag in the Washer, close the lid and program the time (from 3min. To 8min.).
• 4) Once the planned time has been completed, extract the pyramidal bag. Leave to flow l & rsquo; water all & rsquo; internal of the Ice Washer gently squeezing the bag.
• 5) Lower the exit pipe of the & Rsquo; Water flows it flows into the bucket, then reposition the tube.
• 6) Extract the first filter bag and squeeze it gently to make the excess water flow. In this first bag there will be no pollen or resin crystals, but only residues.
• 7) Extract the second bag, with a slow movement from the high down; tall downwards, inside and out of the water; water, try to bring the crystals to the center of the bag. This phase is very important to prevent crystals from dispersing.
• 8) Gently squeeze the filter bag. Wrap with absorbent paper, from the external; external, the part where the crystals were concentrated to encourage the absorption of the excess damp.
• If in possession of multiple filter bags repeat passages 7 and 8.
• The extracted crystals must be placed at the inside of a strainer, use a spoon to press the material obtained against the network in order to filter the crystals on a sheet of paper absorbed.
• This process serves to extract excess humidity and guarantee effective drying.
• Leave to dry for 48h all & rsquo; shadow, at room temperature.
• This phase is very important for the quality of the final product that once dry can be pressed.
• Through the first washing is possible to extract most of the crystals.
• It is recommended to repeat the steps from 4 to 9, with the same raw material, in order to extract the maximum quantity of crystals.
• and & rsquo; You can also filter the same water several times.
• Wash the filtering bags with frozen water as soon as I finished the use to prevent the crystals that remain attached to the walls, it is possible to wash the bags also with alcohol (96%).

The Ice Washer & Egrave; Equipped with

• Electric washing machine 220V 135W
• Pyramid in the towel for the containment of the raw material to be filtered
• Secret-Ice Stocks for the extraction available in the 5-45-90-90-220 Micron Filter Bags
• Instructions in Italian
• Thermometer for temperature control