Vk 250mm centrifugal extractor VK 250mm

The Vents vk 250 Vents VK 250mm extractor fan is the ideal centrifugal aeration device for air circulation within small-sized indoor growing.

Every experienced grower knows what the air extractor is for and knows the importance of good ventilation inside a grow room.

The task of an air extractor is to recirculate the air, extracting the stale air and introducing fresh, clean air inside, avoiding possible problems due to too much humidity and high temperatures. In this way the plants will be able to breathe and grow more beautiful and lush.

The centrifugal extractor fans of the VK series perform their purpose optimally as only a good fan for air exchange can do: at least 70 air changes per hour and a quantity of air exiting greater than that entering.

The motor balanced on ball bearings means that the Vk 250 mm air extractor is extremely silent , but extremely powerful, thanks to the flow rate of 1180 m3/h and the diameter of Ø250 (25 cm).

Its structure made of self-extinguishing technopolymer and the protective shell that covers it make the device particularly resistant to external impacts.

How does a Vents extractor fan work?

The extractor fan is equipped with a propeller, called a centrifuge, which turns quickly and pushes the air towards the entrance of the exhaust ducts.

The power of the centrifugal motor, therefore, transports the extracted air outside and promotes its recycling with clean air, thus maintaining the correct concentration of humidity and temperature without causing damage to your crops.

For optimal operation, it is recommended to place the extractor at a distance not too close to the plants.

The Vents VK 250mm extractor fan is sold with a support/positioning bracket. It is possible to complete the equipment with activated carbon filters and climate control stations such as GSE FanController .

Technical data sheet of the Vents Vk 250mm centrifugal extractor

• Brand and Model: Vents VK 250 - 250mm - 1000m3/h
• Voltage: 230V;
• Current: 0.76A;
• Frequency : 50Hz;
• Power: 173W;
• Flow rate: 1080 m3/h;
• Noise: low 50 dbA at 3m;
• Weight: 4.5Kg;
• Connection diameter : 250 mm;
• Material: shockproof plastic.

Features of the vk 250 extractor

The Vents VK 250mm extractor fan is widely used for rapid and total air renewal, especially for indoor crops.

Compared to traditional extractor fans, this Vents model guarantees greater power but with significantly reduced noise and a minimum level of vibrations.

Among the qualities that make the Vents 250 air extractor one of the most appreciated products by indoor growers and ultra competitive on the market, there are:

• Adjustable speed with an electronic speed controller;
• Balanced motor mounted on ball bearings;
• Active and total thermal protection;
• Shockproof plastic shell;
• Low noise (50 decibels at 3m)
• Support brackets included.

In the table below, you can find the parameters to compare the different functions of the various types of Vents extractor fans on the market: