GSE Fancontroller Min/max temperature Speed Hysteresis

The GSE Fancontroller is a fundamental device for those who want to create an advanced indoor cultivation system. Specifically, it is a necessary tool for regulating the internal temperature, but capable of supporting other functions as well.
First of all, the GSE Fancontroller also allows you to set the minimum and maximum speed of the air extraction or introduction system, affecting the system hysteresis. By doing so, it provides the correct temperature for the specific growth stage of the plant.

How the GSE Fancontroller system is made up

The device is equipped with a minimum and maximum speed regulator and hysteresis and is a single piece, ready for use. This temperature and humidity controller is complete with: waterproof casing, socket with cover, digital voltage sensor. The ideal temperature is set via the hysteresis.

How to use the GSE Fancontroller temperature

Using the GSE Fancontroller system is very simple; minimum speed, maximum speed, temperature and hysteresis (temperature range) are set with four knobs.
It does not require further wiring as it is supplied ready for use. The temperature is measured by a low voltage sensor, perfect for not being damaged by the humidity of the environment in which it is inserted.
The sensor cable is 4 meters long but can be extended as needed, up to 50 meters.

Technical characteristics of the GSE Fancontroller

• Dimensions: 130x80x70mm
• Fan controller dimensions: 160x100x90mm
• Designed for 1x600W / TRIAC 1x25A Volts 230V 50Hz
• 5V digital sensor - measures temperatures from -55°C to +125°C (-67°F to +257°F)
• Accuracy 0.5°C from -10C up to +85°C
• Protection class IP44