GSE Fancontroller 2 channels Temperature humidity speed min. under pressure

GSE control unit

GSE temperature and humidity controller. This 2-channel GSE Fancontroller model completely controls the climate in your grow room. By connecting the air extractor and introducer to the appropriate INTAKE and OUTTAKE sockets, the GSE control unit will coordinate its operation based on the temperature, humidity, speed values minimum and underpressure which are set using the knobs on the front of the instrument.

A constant climate improves the results of your indoor crops as it reduces the problems deriving from the adaptation of the plant to hostile climatic conditions. It also facilitates the grower who will no longer have to reach the ideal climate by trial and error. The connections of the 2-channel GSE Fancontroller are all made up of German-type sockets and plugs. The temperature and humidity sensor is equipped with a 4-meter cable that can be extended up to 50 meters and works in low voltage, guaranteeing better operation in humid environments.

Specifications:

• Packaging: 160x100x90mm
• Packaging: 160x100x90mm
• Fan controllers: 130x80x70mm
• Maximum load: 2x600W / TRIAC 2x5A Volts: 230V 50Hz
• Digital sensor: 5V - measures temperatures from -55°C to +125°C (-67°F to +257°F)
• Accuracy: 0.5°C from -10C up to +85°C
• Protection class: IP54

Filogreen points out that the TT line helical aspirators are not supported by the GSE control units and considers the use of the GSE control unit in grow rooms or large environments almost essential.