GSE Fancontroller 2 channels Temperature and underpressure

This GSE control unit coordinates the operation of the aspirators in your grow room according to the temperature and low pressure parameters. Underpressure or negative pressure is the ratio between extraction and introduction of air.
The GSE 2-channel fan controller keeps both the room temperature and the negative pressure constant, providing your plants with a constant and ideal climate.

The product is already wired and ready to use, just connect it to the power line, connect the aspirators to the special INTAKE and OUTTAKE sockets on the sides of the control unit and set the desired temperature and underpressure values using the corresponding knobs. Finally, place the temperature sensor in a suitable point of the cultivation environment.

• Packaging: 160x100x90mm
• Fan controllers: 130x80x70mm
• Maximum load: 2x600W / TRIAC 2x16A Volts: 230V 50Hz
• Digital sensor: 5V
• measures temperatures from -55°C up to +125°C (-67°F to +257°F)
• Accuracy: 0.5°C from -10C up to +85°C
• Protection class: IP54

Filogreen recommends positioning the sensor of the 2-channel GSE fan controller in the space below the lamp near the plants.
The TT line axial fans are not supported by GSE control units.