Lumatek electronic ballast dimmable 400w

Lumatek electronic ballast. Taking advantage of the control knob that you find on the "output" side, you will have the possibility to adjust the light emission according to your needs. This new system is equipped with a 4-step controller that allows you to set the desired output at 100%, 75%, 50% or "Super Lumen". The "Superlumen" phase will allow you to increase the lumens produced by your lamp by 10%. By adjusting the ignition system to 50%, during the vegetative phase, you will have the possibility to count on clear energy savings: with these settings it is possible to work with both 250w and 400w lamps. Last but not least is the advantage of the low heat emission that this type of power supplies emit thus helping to control the temperatures in the grow spaces.
The Lumatek system works well with HPS, MH and Agro lamps

Lumatek dimmable ballast. Recommendations for use:

• when you want to use the dimming functions, be careful and make sure that the lamp works for at least 10 minutes (consecutively); all of this before changing the setting to a different phase.

• when using a 400w lamp we recommend turning on at 100%, waiting 10 minutes and only then selecting the desired power. Finally we remind (but not for this reason with less recommendation) that making rapid adjustment changes can cause overheating of the bulb. To customize the desired output level, just click, selecting one of the 4 available settings using the control knob.

NB: the Lumatek electronic ballast does not allow the Philips lamps to be switched on, if you have a philips lamp we recommend the purchase of the 600W dimmable Bolt electronic ballast or the 600W Sunmaster Hobby electronic ballast